Three, 8-pound (3.6 kg) hoppers. •Large, lighted front graphics for merchandising. •4.4 gallon hot water tank to meet peak serving times. •Cup clearance at 7.25" (18.4 cm) to accommodate popular cup sizes (adjustable to 8.12" (20.6 cm). •Key service components easily accessible through front and top. •High speed, heavy-duty whipper for complete product mixing. •Front of machine access to tank drain, dump valves, auger and whipper motors, and control board for easy service. •Key lock on the door prevents tampering. •Contemporary styling for striking visual statement. •Low product detection system alerts audibly and with message on display when hoppers are low. •New digital technology adds night mode to prevent pilferage. •Alphanumeric display communicates advertising messages, machine status, and technical support contact information. •Spring-loaded, all meter auger drive system for easy hopper installation. •Front of machine set up and calibration. •Auger motors with RPM feedback monitoring assure consistent flavors and profits by controlling powder dosing. •This product typically ships in 5 - 10 days. •Features, Options & Specifications Subject to Change Without Notice. Product Specifications •Bunn-o-Matic 36900.0001 Specifications •Crated Weight: 90.00 lbs. •Category: Specialty Drink Dispensers •Product #: MPN 36900.0001 •Volts: 120 •Amps: 15 •Watts: 1800 •Cord Attached: Yes (NEMA 5-15P) •Dimensions: 32.8" H x 12.6" W x 24.1" D •Burst Capacity: 36-12 oz. servings in 14 minutes. (to -10°F peak serving temperature) •Electrical: Models require 2-wires plus ground service rated 120V, single phase, 60 Hz. •Plumbing: 20-100 psi (138-690 kPa) from a 1/4" (6.4 mm) or larger supply line. A shut off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 1/4" (6.4 mm) male flare fitting.

Installation is available in the lower 48 states by a Bunn technician for an additional fee.

UPC: 072504117690