Midline Heat Exchange Twin 10 gallon coffee urn 42 gallons per hour.
Fresh Water Brewing
Water used for brewing is fresh water that is heated in a coiled, nickel-plated, copper heat exchange tube inside the urn. As water passes through the heat exchanger coil it is heated to optimum brew temperature.
All A.I.S.I. type 304, 18-8 stainless steel
Constant Brew Temperature
Brew temperature varies less than 5°F (3°C) throughout spray over
Automatic Coffee Agitation
Thoroughly mixes brewed coffee immediately after spray over is completed
Automatic refill of water compartment
Water compartment automatically refills and reheats as needed.
Low water cutoff System
Protects heating elements from burn out, at start-up or in operation.
Velvet Smooth Spray Arm
Teflon® coating on spray arm piston prevents liming and insures smooth operation. Positive "stops" on spray arm for operator ease.
Easy to operate:
Fully Automatic - Push Button Operation
Simply load brew basket with coffee, align spray arm over basket lid hole and press brew start button.
Adjustable Bypass valve on spray arm Enables proper coffee extraction even with variable water conditions
Dial Thermometer with color-marked brew zone.
Thermostat adjustable from front
Knob on thermostat has four marked positions: Brew, Hold, Night Standby and Off.
Drain valve in bottom
Control drawer with all electronic components is accessible from side.120/208V 72amps 15KW. The Grindmaster 74410E is UL and NSF Listed, and requires a 3/8" FPT water inlet and 120/208V electrical connection for operation. This unit must be hard wired; it does not come with a cord and plug.Must be shipped freight, shipping dimensions: 57"H x 41"W x 28"D
MPN 74410E A74410E