Bunn 38600.0001 iMIX-3S+ lighted display Cappuccino Machine 3 Hopper


  • Features large lighted display.•Capacity: three, 8-pound (3.6 kg) hoppers. •Large, lighted front graphics for merchandising. •7 gallon (26.5L) hot water tank to meet peak serving times. •Cup clearance at 7.25" (18.4 cm) to accommodate popular cup sizes (adjustable to 8.12" 20.6 cm). •Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams or powder per second). •Key service components easily accessible through front and top. •Easily removable side panels for complete access to service components. •High speed, heavy duty whipper for complete product mixing. •Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service. •Key lock on the door prevents tampering. •Contemporary styling for striking visual statement. •Spring-loaded, all metal auger drive system for easy hopper installation. •Front of machine set up and calibration. •Can be set as push and hold or single size portion control. •Alphanumeric display allows adjustments and service operational testing from front of machine. Also communicates advertising messages, machine status and technical support contact information. •Bunn-o-Matic MPN 38600.0001 •Crated Weight: 90.00 lbs. •Category: Specialty Drink Dispensers •Product #: 38600.0001 •Volts: 120 •Amps: 15 •Watts: 1800 •Cord Attached: Yes (NEMA 5-15P) •Dimensions: 32.8" H x 19.3" W x 24" D •Burst Capacity: 36 - 12 oz. servings in 37 minutes. (to -10° F (-23.3° C) peak serving temperature) •Plumbing: 20-100 psi (138-690 kPa). from a 1/4" (6.4 mm) or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 1/4" (6.4 mm) male flare fitting. •Electrical: 120 volt model requires 2-wires plus ground service rated 120V, single phase, 60 Hz.

    If you would like to have your machine installed for a fee in the lower 48 states by a Bunn technician the rate is $86.25 for installation, calibration, service, and removal, during business hours. Off business hours it is $129.38 and holidays $172.50.Travel are the same rates mentioned above and management fee is $30.00 per service event. If you are more than 50 miles outside the location of the nearest Bunn dealership there is an additional fee of $ 86.25 to the initial installation fee.

  • Add to Cart:

    • Model: MPN 38600.0001 iMIX-3S+
    • Shipping Weight: 93lbs
    • Manufactured by: Bunn-o-matic
    • Condition: new

    Copyright © 2018 ARCO Coffee Company. Powered by Zen Cart
    We're listed on ShopMania - Online Shopping